Changes for page Configuring Your DIY Sign

Last modified by admin admin on 2023/09/13 12:55
From version < 2.1 >
edited by admin admin
on 2019/11/11 04:39
To version < 2.2
edited by admin admin
on 2023/09/13 12:55
<
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,5 +1,5 @@
1 1  == Configuring Your DIY Sign =
2 -To get started, visit http://bustime.mta.info/sign . After choosing a direction of the bus route and adding stops to the sign, you can enter an optional message to appear on the sign and configure the refresh interval.
2 +To get started, visit https://bustime.mta.info/sign . After choosing a direction of the bus route and adding stops to the sign, you can enter an optional message to appear on the sign and configure the refresh interval.
3 3  
4 4  === Adding Stops ===
5 5  To add stops to your sign, first choose a direction of the bus route of interest under "Choose A Direction". The "Add Stops" dropdown below will update with a list of stops serving that direction.